Search This Supplers Products:Fiber CableFusion SplicerOTDRFiber IdentifierPower MeterFiber Cable Identifier
How loose tube fiber optic cable splicing
time2011/10/10
Loose tube fiber optic cable fusion splicer together the need for specialized equipment to ensure proper justification. A Fiber Splicer for fiber ends aligned, and then use a current together. Immediate integration of the ends together to prevent exposure to contaminated fibers before, you should be prepared to cable. Use a lint-free cloth soaked in alcohol before fusing them to clean the fiber. You should test immediately after the fusion of the cable before using optical time domain reflectometry using optical fiber cables.
Explain
Determine the need to integrate the tool manufacturer's instructions to be removed fiber length jacket.
Adjust the rotation of the cable cut, so the depth of cut of 90% of the fiber jacket thickness. Cut around the jacket. Flex cable, so that the remaining 10% of the coat to break.
Find one end of the cable jacket one of the following two ripcords. The different colors of silk used to wrap the yarn over cable, usually blue, red or orange.
Master a needle nose fusion splicer a ripcord. Nose pliers pliers around the ripcord. Pull the ripcord cable, cut cable, until you reach the circumcision, you in step 2.
From around the buffer tube, cut with scissors aramid yarn. Use the cable out from the buffer tube gel cleaning gel.
Cut buffer tube, with the rotation of the cable cutting machine use the same method used to remove the jacket. Curved pipe, breaking it, and then the end of the fiber. Clean clean each fiber of the cable gel filled plastic. Loose tube at the end of the fusion splicer tray, spread on a clean surface of the fiber.
Explain
Determine the need to integrate the tool manufacturer's instructions to be removed fiber length jacket.
Adjust the rotation of the cable cut, so the depth of cut of 90% of the fiber jacket thickness. Cut around the jacket. Flex cable, so that the remaining 10% of the coat to break.
Find one end of the cable jacket one of the following two ripcords. The different colors of silk used to wrap the yarn over cable, usually blue, red or orange.
Master a needle nose fusion splicer a ripcord. Nose pliers pliers around the ripcord. Pull the ripcord cable, cut cable, until you reach the circumcision, you in step 2.
From around the buffer tube, cut with scissors aramid yarn. Use the cable out from the buffer tube gel cleaning gel.
Cut buffer tube, with the rotation of the cable cutting machine use the same method used to remove the jacket. Curved pipe, breaking it, and then the end of the fiber. Clean clean each fiber of the cable gel filled plastic. Loose tube at the end of the fusion splicer tray, spread on a clean surface of the fiber.